When optimizing a standalone point-to-multipoint bridge installation with eight non-root bridges.
Which of the following rts threshold and cwmin settings would be correct for the non-root bridges？（）
A.rts threshold=4000，cwmin=3
B.rts threshold=1，cwmin=4
C.rts threshold=4000，cwmin=5
D.rts threshold=1，cwmin=5
您可能感興趣的試卷
你可能感興趣的試題
A.debug dhcp enable
B.debug dhcp status enable
C.debug dhcp packet enable
D.enable debug dhcp packet
You are troubleshooting a one-way call problem with a cisco 7920 wireless ip phone on a standalone wlan.
What may cause this problem？（）
A.the minimum data rate is not set to 11 mbps.
B.an address resolution protocol has been disabled
C.publicly secure packet forwarding is enabled
D.the access point is set to the least congested channel.
A.35
B.50
C.100
D.250
A.7
B.60
C.14
D.30
A.mac os x
B.windows 2000 sp4
C.solaris 10
D.windows server 2003
E.debian linux
最新試題
An REAP was supporting 16 WLANs， but now it only supports one.What happened to cause the change？（）
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it， allthe LEDs on the access point blink together.What does this indicate about the access point？（）
A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it， which continue to pass traffic.What has causedthis problem？（）
Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance？（）
Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem？（）
You are troubleshooting a one-way call problem with a Cisco 7920 wireless IP phone on a standalone WLAN.What may cause this problem？（）
You are installing a Cisco 4402 Series Wireless LAN Controller.What type of interface is used on the uplink port？（）
Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticatethe client when one-time passwords are in use？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）
On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter，the status LED and activity LED are alternating on and off.What does this indicate？（）