A.propeller hub
B.lignum vitae
C.shaft packing
D.labyrinth seal
您可能感興趣的試卷
你可能感興趣的試題
A.liquid
B.dry saturated gas
C.wet saturated gas
D.superheated vapor
A.closed, and no leakage permitted across the shaft packing
B.closed, and only slight leakage permitted across the shaft packing
C.open, and no leakage permitted across the shaft packing
D.open, and only slight leakage permitted across the shaft packing
A.freezing point
B.floc point
C.condensing temperature
D.compression temperature
A.the circuit breaker
B.for leaks in the suction piping
C.relief valve is not properly seated
D.the suction strainer
A.increase the refrigerating effect, by decreasing the amount of flash gas
B.allow the refrigerant to enter the throttling device in a saturated condition
C.increase the refrigerating effect by increasing the amount of flash gas
D.minimize the temperature drop of the liquid as it passes through the solenoid valve to the outlet side
最新試題
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by ().
The usual symptoms of cavitation in a centrifugal pump is ().
A grease gun is generally used to lubricate a ().
Thermostatic expansion valves can be adjusted for ().
The major source of chemical contaminants in hydraulic fluid is ().
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should ().
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
When the steering gear is in operation, you should ().
A salinity indicator is used to determine the ().
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().