A.draw a one line diagram of the circuitry
B.test all fuses and measure the line voltage
C.take megger readings
D.insulate the apparatus from ground
您可能感興趣的試卷
你可能感興趣的試題
A.melts and must be replaced
B.is enclosed in a tube of insulating material with metal ferrules at each end
C.gives no visual indication of having opened the circuit
D.trips to break the circuit and may be reset
A.brushes on a commutator
B.brushes on slip rings
C.slip rings on a commutator
D.direct connections from the stator
A.heat-resisting acrylic
B.heat-resisting aluminum
C.insulating varnish
D.insulating white lead
A.hydrogen chloride
B.calcium chloride
C.sulfuric acid
D.muriatic acid
A.can be reset to energize the circuit
B.should open the circuit when overloaded
C.will burn out when an over current flow develops
D.All of the above
最新試題
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
To proceed to the assistance of a ship in distress is（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Under MARPOL Code the ship to which it applies has to carry （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The ISPS Code consists of a mandatory section-Part A, which shows（）
Diesel engine air start system check valves are opened by （）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.