A.copper and antimony
B.steel and babbitt
C.aluminum or beryllium alloy
D.zinc or an alloy of tin and lead
您可能感興趣的試卷
你可能感興趣的試題
A.prevent grounds in branch circuits
B.prevent opens in motor circuits
C.permit momentary overloads without melting
D.guard lighting and electronic circuits
A.Each has three separate but identical armature windings acted on by one system of rotating magnets
B.Each has one armature winding acted on by three identical but separate systems of rotating magnets
C.All three-phase alternators are designed to operate with a O8 leading power factor
D.The three phases always provide power to the load through three sets of slip rings and brushes
A.eliminate slippage
B.provide excitation
C.provide starting torque
D.increase efficiency
A.wash it with fresh water and apply an external source of heat
B.renew the windings
C.send it ashore to an approved service facility
D.rinse all electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air
A.the recommended current and voltage rating
B.higher current and voltage rating
C.higher current and lower voltage rating
D.lower current and higher voltage rating
最新試題
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
Cold weather starting of a diesel engine may be made easier by()
The main purpose of port State control is not to()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
Diesel engine air start system check valves are opened by ()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The ISPS Code consists of a mandatory section-Part A, which shows()