A.steel
B.aluminum
C.glass
D.copper
您可能感興趣的試卷
你可能感興趣的試題
A.suspended by wire slings in one comer of the shop
B.wrapped in several layers of heavy paper or carboard
C.supported by flat wood blocks on the workbench
D.returned to the frame as soon as the bearings are removed
A.frequency
B.number of phases
C.phase rotation
D.All of the above
A.rotor
B.stator
C.exciter
D.armature
A.coulombs per second
B.revolutions per second
C.revolutions per minute
D.cycles per second
A.slightly less than the oncoming generator frequency
B.the same as the bus frequency
C.slightly greater than the bus frequency
D.the same as the bus voltage
最新試題
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The cetane rating of diesel fuel is an indication of the （）
Diesel engine air start system check valves are opened by （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）