A.penetration of moisture
B.accumulation of dirt
C.overheating
D.All of the above
您可能感興趣的試卷
你可能感興趣的試題
A.90~0 kw
B.127~27 kw
C.155~70 kw
D.194~85 kw
A.normal operation
B.a dirty commutator
C.increased brush capacity
D.water vapor absorption
A.high mica condition
B.low ambient temperature
C.clogged ventilation ducts
D.an open in the shunt field
A.ampere
B.volt
C.watt
D.ohm
Some large A-Cmotors are equipped with heatersThese could be （）
(1)resistance heaters bolted directly to the frame
(2)low voltage windings embedded in the motor windings
A.(1) only
B.(2) only
C.either (1) or (2)
D.neither (1) or (2)
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
The condensers located in various stages of a flash evaporator are cooled by（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Which of the following items don’t belong to dock repair works?（）
Under MARPOL Code the ship to which it applies has to carry （）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.