A.cool the bulkheads around the fire
B.remove combustibles from direct exposure
C.close all openings to the area
D.shut off all electric power
您可能感興趣的試卷
你可能感興趣的試題
A.engineer on watch
B.Chief Engineer
C.Chief Mate
D.Master
A.all vessels, regardless of size and commercial application
B.any barge or other ship which is constructed or operated in such a manner that no oil in any form can be carried aboard
C.an oil tanker of 150 gross tons or above, or other ship of 400 gross tons or above
D.an oil tanker of 400 gross tons and above, or other ships of 150 gross tons and above
A.all hands are at their fire stations
B.all fire-fighting equipment is at the scene
C.the fixed systems are activated
D.the fire is contained and no longer spreading
A.one year
B.two years
C.four years
D.five years
A.not less than 3 years and be readily available for inspection
B.6 months and then submitted to the nearest Marine Safety Office for review
C.an annual inspection
D.the duration of the ships active employment
最新試題
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The condensers located in various stages of a flash evaporator are cooled by()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
To proceed to the assistance of a ship in distress is()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
If separating effect is not good, which measure should be taken ()
Diesel engine air start system check valves are opened by ()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()