A.Flows of fluids can be restricted by both cocks and valves
B.There are seats in the internal passages of valves
C.A disc of valve only moves up and down
D.We can infer that there is a bore in cock ping
您可能感興趣的試卷
你可能感興趣的試題
A.There is apparent condensate in piping
B.The steam is not discovered after admitting steam
C.The condensate should be fully loaded in the piping as admitting steam
D.The condensate should be fully drained from the piping while admitting steam
A.People can know the types of fluids in pipes by feeling with hands
B.There are series of rings painted in the pipes to show various fluids
C.Engineers should wear cards standing for ranks
D.Engineer knows his own code very well
A.Oil vapour in air piping are dangerous
B.Explosion will cause oil vapouring in air lines
C.Oil vapour in air piping should be drained
D.Oil in air piping should not be drained
A.The marine bellows joints are attached in the accommodation only
B.The bellows joints should be attached to anchors
C.The associated piping should be thrown into the water like as anchors
D.The connecting piping with the joints should be fixed firmly
A.maximum working temperature
B.minimum working temperature
C.the joint
D.the insulating material
最新試題
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Using a file without a handle may result in ()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
The treatment of the fuel oils involves storage, heating, filtering and()
The main purpose of port State control is not to()
Which of the following items don’t belong to dock repair works?()