A.rack position should be adjusted
B.compensating needle valve should be opened fully compensating
C.needle valve should be adjusted to stabilize operation
D.speed limiting device should be adjusted
您可能感興趣的試卷
你可能感興趣的試題
A.Excessive cylinder liner
B.water in the fuel system
C.Cracked cylinder liner
D.Leaking lube oil cooler
A.the bearing had been overheated
B.water was present in the oil
C.the lube oil was not being properly filtered
D.the maximum allowable bearing pressure had been exceeded
A.decrease the time required between cleanings
B.removes all large and small foreign objects
C.ensure a positive flow of oil at all times
D.ensure that all lube oil has been treated twice
A.a dirty lube oil strainer
B.internal water leaks
C.an oil suction line restriction
D.excessive wears of the cooling water pump
A.sliding the camshaft along its axis
B.rotating the cam 180
C.rotating the cam followers 180
D.moving the idler sprockets in the drive chain
最新試題
() is not installed on the main switchboar.
The treatment of the fuel oils involves storage, heating, filtering and()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
To proceed to the assistance of a ship in distress is()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
The shipboard oil pollution emergency plan will be invalid after ()
The main purpose of port State control is not to()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()