A.so as to never be integral lube
B.with a sloped bottom
C.only of nonferrous, noncorrosive metals
D.with drain/return lines terminating just above or at the designed normal level
您可能感興趣的試卷
你可能感興趣的試題
A.is an indication of the amount of noncombustible material present in the oil
B.indicates the quantity of energy released by burning a unit amount of the fuel
C.is useful for determining proper atomization temperatures
D.reflects the overall thermal efficiency of the fuel oil service system
A.point of opening
B.speed of opening
C.lift from its seat
D.all of the above
A.Steel brush
B.Fine emery cloth or steel wool
C.A section of the removed compression ring
D.A case hardened scraper
A.improper adjustments
B.contaminated fuel
C.coated fuel lines
D.excessive vibration
A.during low loads
B.after proper oil viscosity is reached
C.during starting
D.after cleaning filters
最新試題
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
Using a file without a handle may result in （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
The cetane rating of diesel fuel is an indication of the （）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
（） is not installed on the main switchboar.