A.excessive fuel oil temperature
B.long periods of engine overload
C.metallic contact between nozzles and cylinder heads
D.hard carbon deposit and varnish on the nozzles
您可能感興趣的試卷
你可能感興趣的試題
A.opposed to the crankshaft rocking couple
B.resonant with the crankshaft natural frequency
C.critical fore and aft crankshaft vibrations
D.horizontal whipping motions of the crankshaft
A.cylindrical in shape with service connections located at the top and bottom
B.opened and made available for inspection during biannual inspections provided
C.with automatic drain traps for the removal of moisture
D.so installed as to make the drain connections effective under extreme conditions of trim
A.Hydraulic stress and distortion will develop
B.Hot spots will develop
C.Fuel oil viscosity will increased
D.An increase in trapped deposits of scale and dirt
A.power and intake
B.intake and exhaust
C.exhaust and compression
D.compression and power
A.Hydraulic oil pressure
B.Servomotor action
C.Flyweight centrifugal force
D.Relay motion
最新試題
The main purpose of port State control is not to（）
The shipboard oil pollution emergency plan will be invalid after （）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
If separating effect is not good, which measure should be taken （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）