A.must be centrifuged
B.must by filtered
C.must be changed
D.is holding finely dispersed carbon in suspension
您可能感興趣的試卷
你可能感興趣的試題
A.all excessive amounts of growth will cause the main engines of the vessel to stall due to the inability to supply the proper quantities of fuel to satisfy the existing load
B.The deposits produced by these growths form blockages and flow restrictions ultimately leading to improper atomization of the fuel into the cylinders
C.Eventually the growth of these organisms will deplete the supply of food available to them, which in turn will cause their demise
D.If continual growth is permitted, a sweet odor similar to that associated with baking will be noticed when system components are opened for inspection
A.well knurled
B.slightly streaked
C.lightly glazed
D.highly polished
A.only the replacement of the entire pump would be acceptable
B.the injection pump and injection nozzle must be replaced
C.either the barrel or plunger must be replaced
D.the barrel and plunger must be replaced as a unit
A.bedplate or base
B.sump or oil pan
C.cylinder block
D.frame
A.water in the fuel
B.insufficient fuel for combustion
C.clogged air intake passages
D.burning lubricating oil
最新試題
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The cetane rating of diesel fuel is an indication of the （）
Cold weather starting of a diesel engine may be made easier by（）
Under MARPOL Code the ship to which it applies has to carry （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
If separating effect is not good, which measure should be taken （）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The treatment of the fuel oils involves storage, heating, filtering and（）