A.spray pipes
B.demisters
C.condensers
D.splash baffles
您可能感興趣的試卷
你可能感興趣的試題
A.deaerate the first effect distillate
B.filter the condensed flash vapors
C.deaerate the first and second effect distillate
D.remove small water droplets entrained in the flashed vapor
A.vacuum drag from the auxiliary condensate system
B.individual vacuum pumps
C.a single non-condensing air ejector
D.a two stage air ejector
A.vaporize, with the un-flashed water remaining at the temperature at which it entered the flash chamber
B.vaporize, with the un-flashed eater equalizing to the saturation conditions existing in the f lash chamber
C.vaporize, with the remaining water a t a temperature greater than it entered the flash chamber
D.boil, allowing steam bubbles to rise through the brine at the bottom of the flash chamber
A.combined as part of the salt water feed heater
B.the open area above the brine levels in the first and second stages
C.combined as part of the distillate cooler
D.another term used to describe the vapor feed heater
A.distilling condenser
B.salt water feed heater
C.distillate cooler
D.flash chamber
最新試題
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Cold weather starting of a diesel engine may be made easier by()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
Which of the following items don’t belong to dock repair works?()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()