A.reduce wear on the valve stem
B.permit the use of alloy valve seat materials
C.reduce heat transfer from the valve seat
D.facilitate valve removal for servicing
您可能感興趣的試卷
你可能感興趣的試題
A.place standby cooler in operation
B.reduce engine load
C.check thermostatic valve
D.clean sea water strainer
A.Low lube oil temperature
B.Dirty lube oil strainer
C.Low lube oil pressure
D.High lube oil temperature
A.improper adjustment of the bypass valve
B.a dribble in the fuel injection nozzle
C.insufficient leak-off through injection nozzle packing
D.a malfunctioning injection nozzle
A.hold the valves open
B.keep the valves off their seats until the exhaust stroke is completed
C.close the valves
D.open inlet valves when the air injection cycle begins
A.increased engine breathing efficiency
B.excessive valve lash
C.excessive lube oil consumption
D.lower than normal fuel consumption
最新試題
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Cold weather starting of a diesel engine may be made easier by（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）