A.damage to strainers
B.over-speeding of the engine
C.excessive cooling of the engine
D.injector damage
您可能感興趣的試卷
你可能感興趣的試題
A.Manually trip the over-speed device
B.Interrupt the fuel flow to the engine
C.Disengage the safety interlock
D.Slide the camshaft to the neutral position
A.inlet nozzle ring
B.stationary diffuser passages
C.compressor outlet volute
D.rotating impeller vanes
A.excessive fuel nozzle holder cooling
B.sediment in the fuel supply
C.distortion of the fuel spray pattern
D.improper atomization of the fuel
A.lag behind the increased fuel supplied to the engine
B.enter the engine along with the increase in the fuel
C.enter the engine before the increased fuel supply
D.leave the turbocharger as a negative pulse
A.low compression
B.air-bound fuel system
C.improper spark
D.change in viscosity
最新試題
Using a file without a handle may result in ()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
Under MARPOL Code the ship to which it applies has to carry ()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
The cetane rating of diesel fuel is an indication of the ()
The ISPS Code consists of a mandatory section-Part A, which shows()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The main purpose of port State control is not to()
() is not installed on the main switchboar.
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()