A.loss of power
B.misfiring
C.low fuel oil pressure
D.All of the above
您可能感興趣的試卷
你可能感興趣的試題
A.Increase the cooling water flow to the engine
B.Secure or reduce fuel to that cylinder
C.Screw down on the pressure adjusting spring to decrease to decrease popping pressure
D.Readjust the injection timing
A.The greater the atomization, the greater the penetration
B.The greater the atomization, the less the penetration
C.The degree of atomization has nothing to do with the degree of penetration
D.Atomization and penetration are one and the same
A.Move the fuel control mechanism to the no fuel position
B.Block the fuel supply by closing the master fuel valve
C.Shut off the fuel supply and block the flow of intake air
D.Relieve all pressure in the fuel system
A.airification
B.vaporization
C.atomization
D.gasification
A.reciprocating motion of exhaust valves
B.rotary motion of the camshaft
C.reciprocating motion of the piston
D.developed differential
最新試題
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
The condensers located in various stages of a flash evaporator are cooled by（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.