A.The coolant temperature must be maintained at 180℃
B.The thermostatic bypass valves must be manually opened before the engine is started
C.The pressure cap must be removed while the engine is secured
D.Electrical power to the heater must be secured before the cooling system is drained
您可能感興趣的試卷
你可能感興趣的試題
A.In a two-stroke/cycle engine, the rings run hotter, requiring the end gap to be greater
B.Some provision must be made in a two-stroke/cycle engine to keep the rings from binding in the ports
C.No gap is required to exist between the ends of the ring when cold in a two-stroke/cycle engine, but a small gap is required in a four-stoke/cycle engine
D.The gaps should be staggered on either side of a piston in a two-stroke/cycle engine, while staggering is not necessary in a four-stroke/cycle engine
A.Open the crankcase immediately to check for damage
B.Apply fire fighting water through the crankcase breather
C.Allow the engine to cool before opening the crankcase
D.Assume that there is no damage to the crankshaft
A.carbon
B.vanadium
C.calcium
D.hydrogen
A.Intake manifold pressure will be high
B.Intake manifold pressure will be unaffected
C.Exhaust temperatures will be high
D.Exhaust temperatures will be low
A.an electric grinder
B.a metal scraper
C.a reamer
D.a three-wing hone
最新試題
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
The shipboard oil pollution emergency plan will be invalid after （）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
The cetane rating of diesel fuel is an indication of the （）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Which of the following items don’t belong to dock repair works?（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）