A.crankcase pressure
B.compression pressure
C.scavenge pressure
D.exhaust manifold pressure
您可能感興趣的試卷
你可能感興趣的試題
A.centrifuging the fuel
B.using it in the engine
C.heating the fuel tanks
D.starting the fuel
A.cooling water
B.fuel oil
C.sea water
D.diesel intake air
A.a cracked cylinder liner
B.excessive water in the fuel
C.a leaking intercooler
D.excessive moisture in the scavenge air
A.reservoir
B.hand pump
C.accelerator
D.accumulator
A.Through the crankcase exhauster
B.As water vapor contained in blow-by
C.Demulsifying lube oil passing through the main bearings
D.Condensation from vapor formed in the expansion tank
最新試題
The treatment of the fuel oils involves storage, heating, filtering and（）
（） is not installed on the main switchboar.
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
If separating effect is not good, which measure should be taken （）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The cetane rating of diesel fuel is an indication of the （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）