A.pressed
B.slack
C.inertial
D.elemental
您可能感興趣的試卷
你可能感興趣的試題
A.be visible from both sides and from forward and aft
B.indicate NO SMOKING
C.be displayed only while transferring cargo and fast to a dock
D.use black lettering on a white background
A.COW
B.LOT
C.CBT
D.coferdam
A.Draft and trim
B.Limits of the bending moments
C.Rate of discharging
D.Rate of loading
A.at least
B.at most
C.so big as
D.as large as
A.Down by the bow
B.Down by the stern
C.Down by either the bow or stern
D.In level trim
最新試題
During oil transfer operations，who is responsible for ensuring that the posted transfer procedures are followed?（）.
Notwithstanding the provisions of this Regulation，the segregated ballast conditions for oil tankers less than 150 meters in length shall be to the（）of the Administration.
If you are bunkering and you close off one tank in the line of tanks being filled，the rate of flow to other open tanks on the same line will（）.
Before you start an engine in a compartment，it’s MOST important to（）.
In order to reduce the accumulation of static electricity while loading petroleum products，you should（）.
For the purpose of（）tank or hold washings from any vessel，an application shall be made to Harbor Authorities for approval.
Any oil tanker which is not required to be provided with segregated ballast tanks in accordance with this paragraph may，however，be qualified as a segregated ballast tanker （）it complies with the other requirements of paragraphs of this Convention.
Pump out No.2 port ballast tank to（）.
Every new crude oil tanker of 20000 tons deadweight and above shall be fitted with a cargo tank cleaning system using（）.
Every existing product carriers of 40000 tons deadweight and above shall be provided with segregated ballast tanks and shall comply with the specified requirements，or，alternatively，operate with（）in accordance with the convention.