A.fuel pump should be removed and all connections blanked off
B.cylinder oil feed rate should be increased slightly above that used at normal sea speed
C.cylinder oil feed rate should be reduced
D.cylinder oil feed rate should be increased to the maximum flow capable of the metering pump
您可能感興趣的試卷
你可能感興趣的試題
A.the proper back pressure
B.the cooling water temperature
C.correct timing and proper seating
D.accurate metering and the exhaust temperature
A.low exhaust back pressure
B.air in the fuel system
C.gasket blow-by or leakage
D.incorrect assembly of idler springs
A.Hydraulic starting
B.Electric starting
C.Ignition
D.Fuel
A.pumping action of the piston
B.pressure of the fuel charge
C.vacuum developed in the manifold
D.pressure of the fresh air charge
A.Electric power and starting air
B.Lube oil standby pump and control air
C.Hydraulic switch and engage jacking gear
D.Motor drain and pneumatic control system power
最新試題
To proceed to the assistance of a ship in distress is()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Using a file without a handle may result in ()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()