A.over-speeding of the engine
B.failure of the engine to shut down
C.no effect of engine mounting bolts
D.high exhaust temperatures
您可能感興趣的試卷
你可能感興趣的試題
A.low lube oil temperature
B.low starting air temperature
C.air bubbles in the fuel oil system
D.water in the starting air system
A.Low cooling water outlet temperature
B.High lube oil pressure
C.Low lube oil temperature
D.Low starting air pressure
A.air intake is restricted
B.engine is cranked too fast
C.vibration dampener is faulty
D.exhaust back pressure is low
A.fuel control rack had admitted excessive fuel
B.engine speed does not match the fuel rack setting
C.engine has failed to reach its firing speed
D.starter pinion and ring gear contact is not correct
A.an obstruction in an cylinder
B.water accumulation in some engine cylinders
C.low starting air pressure
D.low scavenge air pressure
最新試題
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
If separating effect is not good, which measure should be taken （）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
The ISPS Code consists of a mandatory section-Part A, which shows（）
（） is not installed on the main switchboar.