A.more sealing water is needed
B.the cover clamp needs tightening
C.the purifier has a bad vibration when started
D.water is discharged from the overflow line
您可能感興趣的試卷
你可能感興趣的試題
A.remove the discharge ring
B.re-prime the purifier
C.the centrifuge to its proper speed
D.install an additional discharge ring
A.flattening of the bowl neoprene O-rings
B.operation within the explosive rang of the fuel
C.excessive purifier operating pressures
D.excessive oil viscosity
A.Carbon particles
B.Lube oil
C.Gasoline
D.Diesel fuel
A.Contamination of the lube oil by emulsification will result
B.The lube oil will not be subjected to the proper centrifugal force
C.The lube oil will overheat and flash
D.Oil will discharge from the heavy phase discharge port and be wasted
A.rated capacity of that purifier
B.viscosity of the oil being purified
C.maximum design speed of that purifier
D.specific gravity of the oil being purified
最新試題
The ISPS Code consists of a mandatory section-Part A, which shows（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The main purpose of port State control is not to（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Under MARPOL Code the ship to which it applies has to carry （）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Diesel engine air start system check valves are opened by （）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）