A.the separator is overload
B.the monitor equipment of separator fails
C.the discharge pump of separator can not work
D.the temperature of oil water is low
您可能感興趣的試卷
你可能感興趣的試題
A.15;inlet value
B.15;inlet and outlet value
C.30;inlet value
D.30;inlet and outlet value
A.filled with bilge water
B.filled with oil
C.filled with clean water
D.be emptied
A.the sensor of low oil level is fully covered by sludge
B.the coarse strainer before the pump in suction system is clogged
C.the screw pump is worn seriously and volumetric efficiency is decreased
D.bilge suction value is clogged
A.the filter is clogged
B.bilge suction value is clogged
C.suction value and discharge value of the pump do not open fully
D.screw pump is worn seriously and volumetric efficiency is decreased
A.separating oil too fast
B.the sensor flushed badly
C.the discharge solenoid value out of order
D.too low heating temperature
最新試題
The condensers located in various stages of a flash evaporator are cooled by()
Under MARPOL Code the ship to which it applies has to carry ()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The shipboard oil pollution emergency plan will be invalid after ()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Using a file without a handle may result in ()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.