A.32~5 amps
B.25 amps
C.1~5 amps
D.30 amps
您可能感興趣的試卷
你可能感興趣的試題
A.the rudder angle indicator reading
B.the desired rudder angle reading
C.the measured rudder angle reading
D.the intended rudder angle reading
A.the rudder should be moved through its full extent
B.the rudder should be moved in starboard direction
C.the rudder should be moved with the ship at maximum speed
D.the rudder should be moved with the ship at minimu
A.Both the main steering gear and the auxiliary steering gear should be operated
B.The alarms fitted to the remote control system should be operated
C.The emergency generator compartment should be checked
D.The communication system between the bridge and the steering gear compartment should be operated
A.tiltable disc
B.gravity disc
C.distributing disc
D.catch plate
A.to provide electrical signal
B.to provide feed-back
C.to provide local manual control
D.to provide right rudder angle
最新試題
The main purpose of port State control is not to()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The treatment of the fuel oils involves storage, heating, filtering and()
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()