A.change AC to DCcurrent
B.change DC to AC current
C.neutralize a armature reaction
D.carry current to the outside circuit
您可能感興趣的試卷
你可能感興趣的試題
A.they are used
B.the field windings are connected to the load
C.the armature circuit is connected to the load
D.the field windings are connected to the armature circuit
A.series circuit
B.grounded circuit
C.short circuit
D.closed circuit
A.means of rheostat the governor settings
B.a balance coil excitation
C.adjusting the governor settings
D.changing excitation
A.shunt
B.high-resistance coil in the armature circuit
C.low-resistance coil in the armature circuit
D.shunt and a coil of high resistance
A.minimum
B.maximum
C.leading
D.lagging
最新試題
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The main purpose of port State control is not to（）
The shipboard oil pollution emergency plan will be invalid after （）
（） is not installed on the main switchboar.
If separating effect is not good, which measure should be taken （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
The treatment of the fuel oils involves storage, heating, filtering and（）
The condensers located in various stages of a flash evaporator are cooled by（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Flame failure in an automatically fired auxiliary boiler can from a/an （）