單項選擇題What is the most likely reason for the dispartly between the actual network numbers at the branches and the routes in the routing table on Gateway-Router?（）

A.Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B.Gateway-Router is configured to only receive RIPv2 updates.
C.Gateway-router is configured to receive only RIPv1 updates.
D.Branch-Router1 is configured to only send RIPv1 updates


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Select the action that results from executing these commands. Switch（config-if）# switchport port-security. Switch（config-if）# switchport port-security mac-address sticky（）

A.A dynamically learned MAC address is saved in the startup-configuration file.
B.A dynamically learned MAC address is saved in the running-configuration file.
C.A dynamically learned MAC address is saved in the VLAN database.
D.Statically configured MAC addresses are saved in the startup-configuration file if frames from that address are received.
E.Statically configured MAC addresses are saved in the running-configuration file if frames from that address are received.

2.單項選擇題which address range efficiently summarizes the routing table of the addresses for router main?（）

A.172.16.0.0/18
B.172.16.0.0/16
C.172.16.0.0/20
D.172.16.0.0/21

3.多項選擇題Which two benefits are provided by creating VLANs？ （）

A.added security
B.dedicated bandwidth
C.provides segmentation
D.allows switches to route traffic between subinterfaces
E.contains collisions

4.多項選擇題

Refer to the exhibit.Assume that the routing protocol referenced in each choice below is configured with its default settings and the given routing protocol is running on all the routers. Which two conditional statements accurately state the path that will be chosen between networks 10.1.0.0 and 10.3.2.0 for the routing protocol mentioned？ （）

A.If OSPF is the routing protocol， the path will be from R1 to R3 to R4 to R5.
B.If OSPF is the routing protocol， the path will be from R1 to R2 to R5.
C.If OSPF is the routing protocol， the path will be from R1 to R5.
D.If RIPv2 is the routing protocol， the path will be from R1 to R3 to R4 to R5.
E.If RIPv2 is the routing protocol， the path will be from R1 to R5.

5.單項選擇題assuming the default switch configuration which vlan range can be added modified and removed on a cisco switch?（）

A.2 through 1001
B.1 through 1001
C.1 through 1002
D.2 through 1005

最新試題

下列哪些是私有IP 地址的地址范圍？（）

題型：多項選擇題

請參見圖示。一臺路由器（其路由表如圖所示）收到發往192.168.1.4的數據包。路由器將如何處理該數據包？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2？（）

題型：多項選擇題

請參見圖示。當計算機A 向計算機D 發送幀時，哪些計算機會接收該幀？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。下列哪組設備僅包含中間設備？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么？（）

題型：?jiǎn)雾?xiàng)選擇題

請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置？（）

題型：?jiǎn)雾?xiàng)選擇題