A.The router that is directly connected to the IP phone will look up the called number in its call routing table.
B.The router that is directly connected to the IP phone will inform its call agent when a service request is detected.
C.When the IP phone is picked up,the IP phone initiates the service request.
D.The directly connected router passes the collected digits to its call agent,and the call agent looks up in its call-routing table the called number.
您可能感興趣的試卷
你可能感興趣的試題
A.propagation delay
B.voice packet serialization delay
C.congested egress queues
D.header overhead
E.packets dropped because of CRC errors
A.Calls to the PSTN can be made via the use of FXO or T1/E1 trunk ports.
B.Calls to the PSTN can be made via FXS or T1/E1 trunk ports.
C.Analog and IP phones can be connected to the VoIP network via FXO or T1/E1 trunk ports.
D.Calls between analog phones that are attached to the FXS ports in a VoIP network can be completely processed by voice-enabled routers.
A.The FXS interface allows an analog connection to be directed at the public switched telephone network (PSTN’s) central office.
B.The FXS interface connects directly to a standard telephone,fax machine,or similar device and supplies ring,voltage,and dial tone.
C.The FXS interface connects directly to an IP phone and supplies ring,voltage,and dial tone.
D.The FXS interface connects directly to ISDN voice channels.
A.Standard encoding techniques create an uncompressed digital data rate of 4000 bps.
B.Standard encoding techniques create an uncompressed digital data rate of 8000 bps.
C.Standard encoding techniques create an uncompressed digital data rate of 64,000 bps.
D.Voice quality is not a concern if compression is not used.
E.Two methods of quantization are linear and logarithmic.
F.Two methods of compression are u-law and a-law.
A.The three required steps in the analog to digital conversion are sampling,encoding,and compression.
B.The three required steps in the analog to digital conversion are sampling,quantization,and compression.
C.The three required steps in the analog to digital conversion are sampling,quantization,and encoding.
D.The output of the sampling process is a pulse code modulation (PCM) signal.
E.The output of the sampling process is a pulse amplitude modulation (PAM) signal.
最新試題
Which two QoS classification and marking statements are true? ()
The Cisco SDM will create a QoS policy that provides services to two types of traffic. Which two statements indicate the default QoS parameters that are created by SDM?()
What can be used to maintain the voice quality on a link by limiting the number of calls that can be active at any given time?()
Within the WMM policy, how many default QoS radio access categories are there?()
Which option correctly identifies the four main menus of a Cisco Wireless Control System (WCS)? ()
End-to-end QoS is maintained in the Cisco WLAN deployment model by utilizing what parameter in lieu of 802.1p?()
SDM creates a low latency queuing (LLQ) service policy with its associated classes. What are the two types of low latency queuing available using the SDM QoS wizard?()
Which set of classes correctly identifies the four traffic classes, from highest priority to lowest priority, specified in the 802.11e standard?()
What are two reasons to implement H·323 gatekeepers?()
Which statement is true about the Call Admission Control (CAC) feature in VoIP networks?()