Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other.
Configurationon ASW1
Interface PortChannel13
switchport mode trunk
switchport trunk allowed vlan 1-9!
Interface PortChannel23
switchport mode trunk
switchport trunk allowed vlan 1-9!
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 10!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 10!
What is the solution of the fault condition？（）
A.Change the VLAN assignment on fa1/0/1 and fa1/0/2 on ASW1 to VLAN 1
B.Change the IP Address of VLAN 10 on DSW1
C.Issue switchport trunk allowed vlan 10，200 on interface portchannel13 and portchannel23 on ASW1
D.Issue switchport trunk allowed vlan none on interface portchannel13 and portchanngel23 on ASW1
您可能感興趣的試卷
你可能感興趣的試題
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other.
Configurationon ASW1
Interface PortChannel13
switchport mode trunk
switchport trunk allowed vlan 1-9!
Interface PortChannel23
switchport mode trunk
switchport trunk allowed vlan 1-9!
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 10!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 10!
The Fault Condition is related to which technology？（）
A.VLAN
B.InterVLAN communication
C.DHCP
D.Switch to Switch Connectivity
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other.
Configurationon ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 1!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 1
What is the solution of the fault condition？（）
A.Given an IP address to VLAN 1 on DSW1
B.Change the IP Address of VLAN 10 on DSW1
C.Issue switchport access vlan 10 command on interfaces fa1/0/1 and fa1/0/2 on ASW1
D.Give static IP addresses to Client 1 and Client 2
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other.
Configurationon ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 1!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 1
The Fault Condition is related to which technology？（）
A.VLAN
B.InterVLAN communication
C.DHCP
D.Port Security
最新試題
Drag and drop the steps in the process for provisioning a cable modem to connect to a headendon the above to the below in the order defined by the DOCSIS standard.
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）
Drag and drop each management protocol on the above to the correct category on the below.
Which statement about PPPoA configuration is correct？（）
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec， which two parameters are required when defining the tunnel interfaceinformation？（）
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
Drag and drop question. The upper gives the MPLS functions， the bottom describes the planes.Drag the above items to the proper location at the below
As a network technician， do you know what is a recommended practice for secure configurationmanagement？（）
Which two encapsulation methods require that an 827 ADSL router be configured with a PPPusername and CHAP password？（）