A. Partitioning of network resources is enabled.
B. VRFs cannot support path isolation from MAN/WAN designs.
C. VRFs cannot be used to map a virtualized data center to a MPLS implementation.
D. VRFs do not allow for the use of application services with multiple access topologies.
E. An access design using a VRF allows for an aggregation layer service module solution.
您可能感興趣的試卷
你可能感興趣的試題
A. Troubleshooting is more complicated.
B. Service and switch modules are underutilized.
C. Layer 2 adjacency is required with the servers that use this design.
D. Layer 3 adjacency is required with the servers that use this design.
E. Load balancing will always occur across both access layer uplinks.
A. Summarize data center subnets.
B. Use passive interfaces to ensure appropriate adjacencies.
C. Tune the EIGRP timers to enable EIGRP to achieve quicker convergence.
D. Adjust the default bandwidth value to ensure proper bandwidth on all links.
E. Advertise a default summary route into the data center core from the aggregation layer.
A. Never use passive interfaces.
B. Use NSSA areas from the core down.
C. Use totally stub areas to stop type 3 LSAs.
D. Use the lowest Ethernet interface IP address as the router ID.
E. Tune OSPF timers to enable OSPF to achieve quicker convergence.
A. Server-to-server traffic always remains in the core layer.
B. The recommended practice is for the core infrastructure to be in Layer 3.
C. The boundary between Layer 2 and Layer 3 should be implemented in the aggregation layer.
D. The Cisco Express Forwarding hashing algorithm is the default, based on the IP address and Layer 4 port.
E. Core layer should run BGP along with an IGP becauseiBGP has a lower administrative distance than any IGP.
A.ASM
B.BiDirPIM
C.PIM-SMRP
D.RP-Switchover
E.SourceSpecificMulticast
最新試題
Cisco Express Forwarding (CEF) is mainly used to increase packet switching speed, reducing the overhead and delays introduced by other routing techniques, increasing overall performance.Which of the following concerning CEF is recommended by Cisco?（）
As an experienced technician, you are responsible for Technical Support. One of the trainees is asking your advice on VPN Termination Device and Firewall Placement. Which of the following approaches will you recommend?（）
Which two of these are advantages of placing the VPN device in the DMZ on the firewall?（）
What is the term for a logical SAN which provides isolation among devices physically connected to the same fabric?（）
Please match the Cisco NAC appliance component to its description.（）(1)Cisco NAS(2)Cisco NAA(3)Rule-set Lpdates(4)Cisco NAM(a) a centralized management point(b) an in-band cr out-of-band device for network access control(c) a Windows-based client which allows network access based on the tasks running(d) a status crecker for operating systems,antivirus,antispyware,etc.
Which two of these are advantages of placing the VPN device parallel to the firewall?（）
What amount of cell overlap ensures smooth roaming for wireless endpoints?（）
In a VoWLAN deployment, what is the recommended separation between cells with the same channel?（）
One of your customers wishes to use the NAS to perform DHCP functions and does not currently have a Layer 3 gateway in its production network. Which gateway mode is appropriate for this customer?（）
During consultation, you find that a customer has only a single asset closet and is looking for a solution that is easy to deploy. Which NAS physical deployment model would you suggest to this customer?（）