A.Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router
B.The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address10.10.0.1
C.The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.1
D.DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2
E.The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.6
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. A network administrator has configured DHCP services on the router asshown. DHCP clients connected to the FastEthernet0/0 interface are working properly. DHCPclients connected to the FastEthernet0/1 interface are not receiving addresses. Which twostatements contain recommendations that will s
olve the problem？（）
A.The network shown in the output under the ip dhcp pool Central command should be changedto network 10.10.0.0 with a mask of 255.255.255.0
B.A second DHCP pool for network 10.10.0.0/24 should be configured
C.An ip dhcp excluded-address global configuration command for network 10.10.0.0/24 should beissued
D.The ip helper-address 10.0.0.1 command should be issued so that the address can be added tothe FastEthernet0/0 configuration
E.The ip helper-address 10.0.0.1 command should be issued so that the address can be added tothe FastEthernet0/1 configuration
A.The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2
B.The configuration is invalid because the DHCP options are global configuration commands
C.The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces
D.The router will choose which pool to use based upon the interface the DHCP request wasreceived on
Refer to the exhibit. Which statement is true about the configuration？（）
A.Hosts belonging to DHCP pool 1 and pool 2 will retain their IP settings for 30 hours before theymust renew
B.Hosts will receive IP settings from pool 1 until the addresses run out， and then hosts will receivethe settings from pool 2
C.Hosts in the 10.10.20.0/24 subnet will use 10.10.20.50 as its DNS server
D.DHCP pool 0 needs to have the ip dhcp excluded-address command to exclude the defaultrouter and DNS servers
A.BOOTP
B.TFTP
C.ARP
D.DNS
E.proxy-ARP
F.FTP
G.CDP
Refer to the exhibit. Which two statements are true？（）
A.DHCPDISCOVER packets will reach the DHCP server
B.The router will not forward DHCPDISCOVER packets because it has not been configured to doso.
C.This configuration is applied to interface Fa0/1
D.DHCPDISCOVER packets will not reach the DHCP server because DHCPDISCOVER packetsare broadcasts
E.DHCPDISCOVER packets will not reach the DHCP server because ports 67 and 68 have notbeen explicitly allowed by the ip forward-protocol command
F.This configuration is applied to interface Fa0/0
最新試題
Study the exhibit carefully. The Cisco IOS IPsec High Availability （IPsec HA） Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is， Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec？（）
Drag the IPsec protocol description from the above to the correct protocol type on the below.（Notall descriptions will be used）Drag and Drop question， drag each item to its proper location.
Which statement about PPPoA configuration is correct？（）
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
cisco ios command to interface dialer 0
Identify the recommended steps for worm attack mitigation by dragging and dropping them into thetarget area in the correct order.
IPSec VPN is a widely-acknowledged solution for enterprise network. Which three IPsec VPNstatements are true？（）
Drag the DSL technologies on the left to their maximum（down/up） data rate values on the below.
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）