You are the network administrator at TestKing. You apply the following access list on the E0 outbound interface connected to the 192.168.1.8/29 LAN:
access-list 21 deny tcp 192.168.1.8 0.0.0.7 eq 20 any
access-list 21 deny tcp 192.168.1.8 0.0.0.7 eq 21 any
What will the effect of this access list be?（）
A. All traffic will be allowed to out of E0 except FTP traffic.
B. FTP traffic from 192.168.1.22 to any host will be blocked.
C. FTP traffic from 192.168.1.9 to any host will be blocked.
D. All traffic will be prevented from leaving E0.
E. All FTP traffic to network 192.168.1.9/29 from any host will be blocked.
您可能感興趣的試卷
你可能感興趣的試題
A. access-list 101 deny tcp 192.168.1.128 0.0.015 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
B. access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any any
C. access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any any
D. access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
E. access-list 101 deny ip 192.168.1.128 0.0.0.240 192.158.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
F. access-list 101 deny ip 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
A. You should place standard ACLS as close as possible to the source of traffic to be denied.
B. You should place extended ACLS as close as possible to the source of traffic to be denied.
C. You should place standard ACLS as close as possible to the destination of traffic to be denied.
D. You should place extended ACLS should be places as close as possible to the destination of traffic to be denied.
A. RouterTK(config-line)# access-class 10 in
B. RouterTK(config-if)# ip access-class 23 out
C. RouterTK(config-line)# access-list 150 in
D. RouterTK(config-if)# ip access-list 128 out
E. RouterTK(config-line)# access-group 15 out
F. RouterTK(config-if)# ip access-group 110 in
Study the information and the relevant configuration file below for the Testking Branch router
What additional command must be executed on the Branch router before interesting traffic will initiate an ISDN call?（）
A. (config-if)# dialer-group 1
B. (config-if)# dialer-list 1
C. (config-if)# dialer map 1
D. (config-if)# dialer-route 1
The following access list below was applied outbound on the E0 interface connected to the 192.169.1.8/29 LAN:
How will the above access lists affect traffic?（）
A. FTP traffic from 192.169.1.22 will be denied.
B. No traffic, except for FTP traffic will be allowed to exit E0.
C. FTP traffic from 192.169.1.9 to any host will be denied.
D. All traffic exiting E0 will be denied.
E. All FTP traffic to network 192.169.1.9/29 will be denied.
最新試題
Given a subnet mask of 255.255.255.224, which of the following addresses can be assigned to network hosts?（）
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? （）
A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? （）
What is the purpose of pressing the Ctrl+Break keys during the router password recover procedure?（）
What is a global command?（）
What is the subnetwork address for a host with IP address 201.100.5.68/28?（）
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? （）
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）