A. T1
B. Frame Relay
C. DSL
D. PPP
E. ISDN
F. IPX
您可能感興趣的試卷
你可能感興趣的試題
A. IP address
B. encapsulation PPP
C. no shutdown
D. PPP authentication CHAP
E. Speed
F. None of the above
A. Needs to use Inverse ARP.
B. Maps a single IP subnet per DLCI.
C. Maps a single IP subnet across multiple DLCIs.
D. Resolves NBMA (non broadcast multi access) split horizon issues.
E. Requires use of the frame-relay map command.
F. None of the above
A. point-to-point
B. broadcast multi-access
C. nonbroadcast multipoint
D. nonbroadcast multi-access
E. broadcast point-to-multipoint
A. Each ISDN B channel has transmission speeds of up to 64 kbps.
B. The ISDN B channel can carry video, voice or data.
C. The ISDN B channel transmission rate varies depending on the service used.
D. The ISDN D channel transmits control information.
E. The ISDN B channels can be configured with different subnets and encapsulation types when dialer profiles are configured.
A. Legacy DDR can use port information to define interesting traffic.
B. Legacy DDR can configure multiple dialer configurations on the same interface.
C. Legacy DDR can use ACLs to define interesting traffic.
D. HDLC or PPP can be used to encapsulate ISDN D channel information.
E. The BRI interfaces on ISDN routers with dialer profiles configured cannot belong to multiple dialer pools.
F. Dialer profiles cannot use extended ACLs to define interesting traffic.
最新試題
Which characteristics are representative of a link-state routing protocol?（）
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? （）
Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）
The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? （）
Given a subnet mask of 255.255.255.224, which of the following addresses can be assigned to network hosts?（）
The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?（）
Which of the following statements regarding routed and routing protocols are true?（）
A Class C network address has been subnetted with a /27 mask.Which of the following addresses is a broadcast address for one of the resulting subnets?（）
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? （）