A policy needs to be implemented on Router B so that any traffic sourced from 172.16.10.0/24 will be forwarded to Router C. Which configuration on Router B will achieve the desired effect?（）
A.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface e0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 1 72.16.14.4
B.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface s0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.3
C.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface e0 ip polic y route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.2
D.access -list 1 deny 172.16.10.0 0.0.0.255 ! interface s0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.2
您可能感興趣的試卷
你可能感興趣的試題
During the redistribution process configured on RTA, some of the EIGRP routes, such as 10.1.1.0/24 and 10.2.2.0/24,are not being redistributed into the OSPF routing domain. Which two items could be a solution to this proble m?（）
A. Change the EIGRP AS number from 100 to1 in the redistribute command.
B. Add the subnets option to the redistribute command.
C. Change the metric - type to2 in the redistribute command.
D. Configure the redistribute command under router eigrp 1 i nstead.
E. Change the metric to an EIGRP compatible metric value (bandwidth, delay, reliability, load, MTUs) in the redistribute command.
A. 39.0f01.0002.0000.0c00.1111.00
B. 48.0f01.0002.0000.0c00.1111.00
C. 49.0004.30ac.0000.3090.c7df.00
D. 52.0f01.0002.0000. 0c00.1111.00
A. IGMP
B. IGMP snooping
C. PIM - DM
D. DVMRP
E. MOS PF
Refer to the exhibit. Which command would verify if PBR reacts to packets sourced from 172.16.0.0/16?（）
A. show ip route
B. show policy - map
C. show access - lists
D. show route - map
A. Areas introduce a boundary on the link - state updates.
B. Areas are logical definitions specific to any given router.
C. All routers within an area have the exact link - state database.
D. The calculation of the Dijkstra algorithm on a router is limited to changes within an area.
E. The area designated router will always have a priority of 0.
最新試題
Router R1 has been conf igured with an ipv6 route 2000::/64 S0/0/0 64 command.Which of the following does the 64 at the end of the command represent?（）
Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router.Which of the following could be the link local address of R1's interface S0/0?（）
Which of the following answers lists a multicast IPv6 address?（）
The following configura tion exists on a router on one end of an IPv6 tunnel. Which type of tunnel is created by this configuration?（）interface loopback 1ip address 1.1.1.1 255.255.255.255interface tunnel 2ipv6 address 2000::1::/64tunnel source loopback 1tunnel destina tion 2.2.2.2tunnel mode ipv6ipipv6 eigrp 1
An Enterprise rou ter, Ent1, displays the following excerpt from the show ip bgp command. ENT1 has an eBGP connection to an ISP router with address 3.3.3.3 and an iBGP connection to a router with address 4.4.4.4. Which of the following is most likely to be true?（）Network Next Hop Metric LocPrf Weight Path*> 3.3.3.3 0 0 1 1 1 1 218 i
Which of the following is the shortest valid abbreviation for FE80:0000:0000:0000:0010:0000:0000:0123?（）
Router R1 lists the following output from a show command. Which of the following is true about R1?（）R1# show ip v6 interface f0/0FastEthernet0/0 is up, line protocol is upIPv6 is enabled, link - local address is FE80::213:19FF:FE12:3456No Virtual link - local address(es):Global unicast address(es):2000::4:213:19FF:FE12:3456, subnet is 2000:0:0:4::/64 [EUI]Jo ined group address(es):FF02::1FF02::2FF02::1:FF:12:3456
Router R1 sits at an Enterprise branch office, using the Internet for its only connectivity back to the rest of the EnterprisE.Which of the following is not a ben efit of using an IPsec tunnel for packets sent through the Internet, between R1 and the rest of the Enterprise?（）
Which of the following IPv6 tunneling mechanisms support IPv6 IGP routing protocols?（）
Look at the following configuration below and select the statements that are true.（）RD2(config)#router ospf 100RD2(config - router)# distance 180 10.1.10.1 0.0.0.0 match - meRD2(config -router)#!RD2(config - router) #ip access - list standard match - meRD2(config - std - nacl)# permit host 172.16.0.0