The following output occurs on Router R2. Which of the following statements can be confirmed as true based on the output from R2?（）
R2# show ip policy
Interface Route map
Fa0/0 RM1
Fa0/1 RM2
S0/0/0 RM3
A. R2 will forward all packets that enter Fa0/0 per the PBR configuration.
B. R2 will use route map RM2 when determining how to forward packets that exit interface Fa0/1.
C. R2 will consider using PBR for all packets exiting S0/0 /0 per route map RM3.
D. R2 will consider using PBR for all packets entering S0/0/0 per route map RM3.
您可能感興趣的試卷
你可能感興趣的試題
Examine the following configuration on Router R1. R1's show ip route 172.16.4.1 command list s a route with outgoing interface S0/1/1. Host 172.16.3.3 uses telnet to connect to host 172.16.4.1.What will Router R1 do with the packets generated by host 172.16.3.3 because of the telnet,assuming the packets enter R1's F0/0 interface?（）
interface Fastethernet 0/0
ip address 172.16.1.1 255.255.255.0
ip policy route - map Q2
!
route - map Q2 permit
match ip address 101
set interface s0/0/1
!
access - list 101 permit tcp host 172.16.3.3 172.16.4.0 0.0.0.255
A. The packet will be forwarded out S0/0 /1, or not at all.
B. The packet will be forwarded out S0/0/1 if it is up.
C. The packet will be forwarded out S0/1/1 if it is up.
D. The packet will be forwarded out S0/1/1 if it is up, or if it is not up, out s0/0/1.
E. The packet will be forwarded o ut S0/0/1 if it is up, or if it is not up, out s0/1/1.
A. Packets entering F0/0 will be compared based on the PBR route map.
B. Packets exiting F0/0 will be compared based on the PBR route map.
C. IOS ignores the PBR forwarding directions wh en the packet matches a route map deny clause.
D. IOS ignores the PBR forwarding directions when the packet matches a route map permit clause.
A. Kilobits/seconD
B. Tens of microseconds
C. Cost
D. Hop count
E. No unit is assigneD
A co-worker is developing an implementation plan for a design that uses OSPF 2 and RIPv2 routing domains, with two routers redistributing between the two domains.The co- worker asks your help in choosing how to prevent domain loops by setting administrative distance.
Assuming all other related settings use defaults, which of the following would solve the domain loop problem?（）
A. The distance ospf intra - area 80 inter - area 80 OSPF subcommand
B. T he distance ospf external 80 OSPF subcommand
C. The distance ospf intra - area 180 inter - area 180 OSPF subcommand
D. The distance ospf external 180 OSPF subcommand
A network includes a RIPv2 domain, an EIGRP domain, and an OSPF domain. Each pair of routing domains has multiple routers redistributing routes between the p air of domains. The design requires that the redistribution configuration avoid matching based on prefix/length because of the trouble in maintaining such configurations.
Which one of the following tools can be used in all three routing domains to attem pt to prevent domain loops?（）
A. Setting route tags
B. Setting the default administrative distance differently for internal and external routes
C. Setting administrative distance differently per route
D. Setting metrics much higher for all ext ernal routes than for all internal routes
最新試題
Router R1, a branch router, connects to the Internet using DSL. Some traffic flows through a GRE and IPsec tunnel, over the DSL connection, and into the core of an Enterprise network. The branch also allows local hosts to communicate directly with public sites in th e Internet over this same DSL connection.Which of the following answers defines how the branch NAT config avoids performing NAT for the Enterprise directed traffic but does perform NAT for the Internet - directed traffic?（）
An Enterprise rou ter, Ent1, displays the following excerpt from the show ip bgp command. ENT1 has an eBGP connection to an ISP router with address 3.3.3.3 and an iBGP connection to a router with address 4.4.4.4. Which of the following is most likely to be true?（）Network Next Hop Metric LocPrf Weight Path*> 3.3.3.3 0 0 1 1 1 1 218 i
Which of the following must match for two directly connected routers running OSPF to establish a neighbor adjacency?（）
Which of the following answers lists either a protocol or function that can be used by a host to dynamically learn its own IPv6 address?（）
Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured.Which combinations accurately describe the interface under which a feature will be configured?（）
An enterprise h as plans to start adding IPv6 support. For the first year, the IPv6 will be in small pockets spread around the existing large IPv4 network, with occasional IPv6 traffic while applications teams test IPv6 - enabled servers and applications.Which of the fol lowing tools would be most appropriate?（）
An engineer is reviewing another engineer's sample configuration for a GRE tunnel used to pass IPv6 traffiC. The tunnel ha s not yet been configured on the router.Which of the following commands is not required for the configuration to pass IPv6 traffic?（）
The following output occurs on Router R1 , which runs both EIGRP for IPv6 and OSPFv3, with redistribution from EIGRP into OSPF configured with the redistribute eigrp 1 metric 25 command. Interface S0/0/1 has been enabled for EIGRP ASN 1. Which of the following should be true of redistribution in this case?（）D 2000::/64 [90/1422516]via FE80::213:19FF:FE7B:5026, Serial0/0/1C 2000:0:0:1::/64 [0/0]via Serial0/0/1, directly connectedL 2000::1:213:19FF:FE7B:5004/128 [0/0]via Serial0/0/1, receive
An enterprise has plans to start adding IPv6 support. The initial deployment requires support from some IPv6 - only device s that need to access servers that support only IPv4.Which of the following tools would be most appropriate?（）
Router R1 sits at an Enterprise branch office, using both the Internet and a leased line to another Enterprise router for its two connectivity options back into the rest of the Enterprise network. The engineer planning for this branch decided to use the leased line for all Enterprise traffic, unless it fails, in which case the Internet connection should be used to pass traffic to the Enterprise.Which of the following is most likely to be useful on the branch router?（）