A.The cable lifter
B.The hoisting motor
C.The topping wire
D.The life-raft
您可能感興趣的試卷
你可能感興趣的試題
A.stays
B.winches
C.barrels
D.brakes
A.fire-tubes
B.furnaces
C.water drums
D.water wall tubes
A.The three moving vanes and the three fixed vanes form three pressure chambers
B.The three moving vanes and the three fixed vanes form six pressure chambers
C.The three moving vanes and the three fixed vanes form nine pressure chambers
D.The three moving vanes and the three fixed vanes form twelve pressure chambers
A.It is required that all ships are provided with two independent steering gear systems that is one main and one auxiliary
B.The auxiliary gear could be power operated in passenger ships
C.The auxiliary gear must be of adequate strength and sufficient to steer a ship at navigable speed
D.All moving parts of the steering gear must be guarded against any possible damage
A.Only one pump should be used at any time
B.The ship speed should be reduced to 70% of the normal
C.Watch keeping of the steering gear should be increased
D.Limitations of the steering gear should be logged but the bridge need not be informed
最新試題
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by ().
Which of the listed pumps is NOT a positive displacement pump?()
The output volume of a positive fixed displacement pump can be changed only by ().
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is ().
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?()
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
Low compressor head pressure in a refrigeration system can be caused by().
A grease gun is generally used to lubricate a ().
When the steering gear is in operation, you should ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().