A.Ash content, carbon residue, and gravity
B.Viscosity, acidity, and demulsibility
C.Pour point, flash, point, and precipitation number
D.Auto-ignition point, viscosity index, and film strength
您可能感興趣的試卷
你可能感興趣的試題
A.Protects against suction valve float
B.Provides a positive pressure on the air inlet valves
C.Prevents lubricating oil contamination of the compressed air supply
D.Protects against the damaging effects of airborne solid particles
A.warm-up allows the hydraulic system to become charged with oil
B.warm-up allows the relief valves to be properly tested
C.hydraulic strainers operate only during the warm-up period
D.hydraulic fluid must be at the proper viscosity
A.are exposed to a vacuum
B.come in contact with extremely hot surfaces
C.are reduced in temperature to just above the pour point
D.become extremely agitated or aerated
A.weight
B.internal friction
C.demulsibility
A.Extensive centrifuging
B.Wax content
C.Water content
D.Acid content
最新試題
The output volume of a positive fixed displacement pump can be changed only by （）.
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?（）
Thermostatic expansion valves can be adjusted for （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?（）
A salinity indicator is used to determine the （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
Low compressor head pressure in a refrigeration system can be caused by（）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.