A.freezing the expansion valve closed
B.corrosion of system piping
C.improper temperature regulation
D.all of the above
您可能感興趣的試卷
你可能感興趣的試題
A.built up propeller
B.solid propeller
C.controllable pitch propeller
D.suction back propeller
A.ignition temperature
B.flash point
C.flammable range
D.convection index
A.freeze on the expansion valve seat and reduce the flow of liquid refrigerant
B.emulsify the oil in the condenser
C.freeze in the king valve
D.clog the oil trap
A.The colder seawater passing through the condenser tube bundles of the various stages increases evaporator vacuum
B.The amount of heated feed water discharged from the feed water heater after cndenser is increased
C.Fewer non-condensable gases are created by the flow of colder seawater
D.More seawater is allowed to pass through the flint stage overflow weir
A.bleeding refrigerant from the condenser
B.opening a drain petcock on the oil separator
C.condensing the water in the heat exchanger
D.using a dehydrator cartridge
最新試題
A pressure drop through the refrigerant liquid line may cause （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
A salinity indicator is used to determine the （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
The major source of chemical contaminants in hydraulic fluid is （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.