A.bleeding refrigerant from the condenser
B.opening a drain petcock on the oil separator
C.condensing the water in the heat exchanger
D.using a dehydrator cartridge
您可能感興趣的試卷
你可能感興趣的試題
A.drill holes through the heavy side of the impeller until it balances
B.weld counterweights to the light side of the impeller
C.remove metal from the heavy side by machining in a lathe
D.acid wash and serape the heavy side until it balances
A.cause loss of hydraulic oil from the system
B.result in extreme damage to the pump
C.cause damage to the pump ff not continually drained from the pump casing
D.result in the system high side pressure to substantially drop off
A.saltwater heater shell
B.second-stage condenser
C.atmosphere
D.second-stage flash chamber
A.Ash content, carbon residue, and gravity
B.Viscosity, acidity, and demulsibility
C.Pour point, flash, point, and precipitation number
D.Auto-ignition point, viscosity index, and film strength
A.Protects against suction valve float
B.Provides a positive pressure on the air inlet valves
C.Prevents lubricating oil contamination of the compressed air supply
D.Protects against the damaging effects of airborne solid particles
最新試題
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?()
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should ().
The output volume of a positive fixed displacement pump can be changed only by ().
One cause of high head pressure occurring in a refrigeration system can be ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its ().
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will ().
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?()
Which of the listed pumps is NOT a positive displacement pump?()