A.removing all but the frictional load during starting
B.relieving intercoolers of high temperature buildups
C.providing high starting torque in the drive motor
D.seating valve plates during compressor shutdown
您可能感興趣的試卷
你可能感興趣的試題
A.loose expansion valve control bulb
B.low differential setting on the H-Pcutout
C.blown fuse in the motor circuit
D.faulty suction pressure regulator
A.prevent an internal explosion in the pump when it is overheated
B.enable a visual inspection of the pump while it is running
C.insure a proper alignment of the pump coupling to the driver
D.accommodate for friction between the impeller and the easing
A.explosive range
B.flash point
C.ignition temperature
D.combustion temperature
A.the pressure regulating valve is not closing
B.an excessive lack of refrigerant in the system
C.badly leaking discharge valves
D.worn piston rings
A.Both are higher than normal burning temperatures
B.The flash point is always higher
C.The ignition temperature is always higher
D.They are not necessarily related
最新試題
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
One cause of high head pressure occurring in a refrigeration system can be （）.
Thermostatic expansion valves can be adjusted for （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
A grease gun is generally used to lubricate a （）.
Low compressor head pressure in a refrigeration system can be caused by（）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.