A.close the static leg filling valve
B.close the overflow tank falling valve
C.reduce the fuel oil pumping rate
D.stop the fuel oil pumping operation
您可能感興趣的試卷
你可能感興趣的試題
A.The pressure-vacuum relief valve should be reset
B.The tanks should be made seaworthy to prevent contamination
C.The tanks should be sounded to make sure the levels are not rising
D.The tanks should be marked with a bull stamp on the manifold filling valve
A.hose joints are made up
B.tanks are being topped off
C.system is being lined up
D.pumping operation is first started
A.Reduce the pumping rate by closing the deck filling valve
B.Close all overflow valves
C.Place 5 gallon containers under all flange connections in the fuel line
D.Reduce the pumping rate and sound tanks frequently as the level rises
A.Increased viscosity of the product needs higher loading pressure, which increases the chances of a spill
B.Air pockets may cause the fuel to bubble out of the ullage hole
C.The temperature rise of the fuel will cause an overflow
D.Fueling valve may become stuck closed and cause the fuel oil to spill before the valve can be opened
A.actuate an alarm and open the engine room control valve
B.actuate an alarm and open the engine room CO2 releasing valve
C.open the engine room control valve and shut off engine room ventilation fans
D.open the engine room control valve and then the CO2 releasing valve
最新試題
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
The shipboard oil pollution emergency plan will be invalid after （）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Diesel engine air start system check valves are opened by （）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.