A.bypass exhaust gas at high loads to prevent excessive back pressure
B.bypass a portion of the exhaust gas at peak loads for better efficiency
C.recycle exhaust gas to the turbocharger
D.minimize moisture condensation in the boiler gas passages at low loads
您可能感興趣的試卷
你可能感興趣的試題
A.Correct the cause of the scoring and repair the sleeve or replace with a new one
B.Reassemble the unit and provide more water leak off for proper lubrication
C.Check for parallel alignment of the sleeve radial faces to the sleeve bores
D.Reassemble the unit and adjust the governor to obtain a slower speed
A.Copper
B.Copper and carbon
C.Carbon
D.Bronze
A.Chilled water system supply temperature
B.Chilled water system return temperature
C.Compressor discharge temperature
D.Compressor suction pressure
A.water
B.voltage
C.fuel pressure
D.steam pressure
A.sliding bowl bottom
B.bowl hood
C.bowl
D.filter units
最新試題
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Cold weather starting of a diesel engine may be made easier by()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The treatment of the fuel oils involves storage, heating, filtering and()
The shipboard oil pollution emergency plan will be invalid after ()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
To proceed to the assistance of a ship in distress is()
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()