A.have a larger than normal dead band
B.produce excessive speed response to a load change
C.respond slowly to any change in engine load
D.stabilize engine speed at the new governor setting
您可能感興趣的試卷
你可能感興趣的試題
A.plating forming the engine room tank top
B.doubler plating installed over the flat keel plate
C.a watertight boundary formed by the inner bottom
D.compartments between the inner and outer bottoms
A.auto-ignition point
B.flash point
C.burning temperature
D.fire point
A.double bottom fuel oil tank temperature
B.heater supply steam flow
C.pressure of the fuel supplied to the burners
D.attemperator steam flow in the heater discharge circuit
A.have no plating joints of 90
B.retain the lube oil as long as possible before it recirculates through the system
C.provided drain/return lines that are no greater than 24 inches from the pump suction
D.be provided with only a perfectly horizontal bottom
A.cause an alarm condition
B.secure power to the indicator
C.secure power to the monitored device
D.automatically recluse within 10 seconds
最新試題
Using a file without a handle may result in ()
If separating effect is not good, which measure should be taken ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The condensers located in various stages of a flash evaporator are cooled by()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
Cold weather starting of a diesel engine may be made easier by()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
The cetane rating of diesel fuel is an indication of the ()