A.cause an alarm condition
B.secure power to the indicator
C.secure power to the monitored device
D.automatically recluse within 10 seconds
您可能感興趣的試卷
你可能感興趣的試題
A.Fuel oil service pump discharge
B.Fuel oil strainer
C.Fuel oil heater
D.Fuel oil flow meter
A.maintain even distribution of bearing wear
B.maintain a constant oil temperature
C.maintain a pressurized film between moving surfaces
D.remove entrained water
A.so as to never be integral lube
B.with a sloped bottom
C.only of nonferrous, noncorrosive metals
D.with drain/return lines terminating just above or at the designed normal level
A.is an indication of the amount of noncombustible material present in the oil
B.indicates the quantity of energy released by burning a unit amount of the fuel
C.is useful for determining proper atomization temperatures
D.reflects the overall thermal efficiency of the fuel oil service system
A.point of opening
B.speed of opening
C.lift from its seat
D.all of the above
最新試題
The ISPS Code consists of a mandatory section-Part A, which shows（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The main purpose of port State control is not to（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.