A.Over speed
B.fire improperly
C.lose oil pressure
D.overheatrapidly
您可能感興趣的試卷
你可能感興趣的試題
A.torque limiter
B.over-speed trip
C.over-speed governor
D.load limit governor
A.fuel dribbling from leaking fuel injectors
B.burning fuel with a high carbon content
C.burning fuel with a high vanadium content
D.burning fuel with a lower sulphur content
A.high combustion temperature
B.high compression pressure
C.cracked cylinder liner
D.fuel with a high vanadium content
A.low combustion temperature
B.a leaking fuel nozzle check valve
C.late fuel injection
D.plugged oil-scraper ring hole
A.the engine is overloaded
B.the engine is cold
C.there is too much lube oil in the cylinders
D.the turbocharger is fouled
最新試題
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
The treatment of the fuel oils involves storage, heating, filtering and（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
If separating effect is not good, which measure should be taken （）
The main purpose of port State control is not to（）