A.cause blow-by
B.chemically attack the piston skirt
C.form an emulsion of lube oil and water
D.raise the piston temperature
您可能感興趣的試卷
你可能感興趣的試題
A.An increased air temperature differential between the cooler inlet and outlet
B.A decrease in the air pressure differential across the cooler
C.Excessive condensate forming in the air box
D.A decrease in the air temperature differential between the cooler inlet and outlet
A.lube oil pumping
B.rotating rings
C.gas pressure behind the ring
D.passage of hot gases
A.insufficient lubrication
B.improper piston cooling
C.blow-by
D.overload operation
A.has a crown-face
B.exceeds wear limits through normal wear
C.has excessive blow-by
D.is in good condition
A.combustion gas blow-by
B.excessive lubrication
C.properly functioning rings
D.insufficient cylinder cooling
最新試題
The treatment of the fuel oils involves storage, heating, filtering and（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The ISPS Code consists of a mandatory section-Part A, which shows（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The cetane rating of diesel fuel is an indication of the （）
Using a file without a handle may result in （）
If separating effect is not good, which measure should be taken （）