A.keep piston crown temperatures elevated for smoother combustion
B.reduce the possibility of overheating the top compression ring
C.help retain the heat of compression to prevent ignition delay
D.help retain the heat of compression to prevent combustion knock
您可能感興趣的試卷
你可能感興趣的試題
A.dispersant additives
B.floc point
C.alkalinity additives
D.ignition quality
A.starting the engine hot
B.knurling the piston skirt
C.operating an overheated engine
D.using scuff resistant piston rings
A.the amount of lube oil additives increase
B.piston speeds increase
C.injection pressure decrease
D.engine speeds decrease
A.less piston slap and quieter running
B.increased crankshaft bearing wear
C.slightly greater piston wear
D.decreased side pressures
A.Liner wear is distributed equally between the upper and lower portions of the cylinder
B.Excessive liner wear causes wear between piston ring and groove
C.Excessive, but uniform liner wear will not cause wear between piston ring and groove
D.Liner wear is normally greatest in the middle of the cylinder
最新試題
If separating effect is not good, which measure should be taken （）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
The shipboard oil pollution emergency plan will be invalid after （）
Cold weather starting of a diesel engine may be made easier by（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Which of the following items don’t belong to dock repair works?（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
The main purpose of port State control is not to（）
（） is not installed on the main switchboar.