A.reducing exhaust gas velocity
B.increasing the frequency of gas vibration
C.the use of long head pipes
D.the use of zinc electrodes
您可能感興趣的試卷
你可能感興趣的試題
A.white smoke in the exhaust
B.high exhaust gas pyrometer readings
C.sparks in the exhaust
D.blue smoke in the exhaust
A.check the cylinder exhausts for black smoke
B.listen for combustion knock in that cylinder
C.isolate each cylinder and inspect the injector
D.check the cylinder exhaust temperature frequently
A.passing the exhaust through long head pipes
B.diffusing exhaust vibrations through activated carbon baffles
C.increasing the exhaust gas velocity
D.reducing the exhaust gas velocity
A.stop the engine immediately to prevent damage
B.increase lube oil pressure
C.slow the engine allowing it to gradually cool
D.decrease the cooling water it temperature to the water jacket
A.worn cylinder liner
B.faulty cylinder relief valve
C.excessive lube oil pressure
D.excessive scavenge air pressure
最新試題
Under MARPOL Code the ship to which it applies has to carry （）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
If separating effect is not good, which measure should be taken （）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）