A.cylinder exhaust ports
B.injection line
C.cylinder indicator cock
D.banjo oiler line
您可能感興趣的試卷
你可能感興趣的試題
A.reducing exhaust gas velocity
B.increasing the frequency of gas vibration
C.the use of long head pipes
D.the use of zinc electrodes
A.white smoke in the exhaust
B.high exhaust gas pyrometer readings
C.sparks in the exhaust
D.blue smoke in the exhaust
A.check the cylinder exhausts for black smoke
B.listen for combustion knock in that cylinder
C.isolate each cylinder and inspect the injector
D.check the cylinder exhaust temperature frequently
A.passing the exhaust through long head pipes
B.diffusing exhaust vibrations through activated carbon baffles
C.increasing the exhaust gas velocity
D.reducing the exhaust gas velocity
A.stop the engine immediately to prevent damage
B.increase lube oil pressure
C.slow the engine allowing it to gradually cool
D.decrease the cooling water it temperature to the water jacket
最新試題
Cold weather starting of a diesel engine may be made easier by（）
Which of the following items don’t belong to dock repair works?（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
（） is not installed on the main switchboar.
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The condensers located in various stages of a flash evaporator are cooled by（）
To proceed to the assistance of a ship in distress is（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）