A.turn engine with jacking gear
B.drain filters and strainers and bleed off water at each injection pump
C.use ether to start the engine with blow-down valves open
D.blow through the cylinders and fuel lines with a drying agent
您可能感興趣的試卷
你可能感興趣的試題
A.Compression ratio
B.Fuel/Air ratio
C.Compression pressure
D.Lube oil pressure
A.test the starting system
B.remove condensation from the cylinders
C.check the compression
D.check for proper lube oil pressure
A.turn the flywheel
B.reduce friction
C.overcome inertia
D.ignite the fuel
A.lower compression pressures
B.overheating without smoking
C.failure to start
D.a run away without load
A.Flywheel inertia
B.Admission of starting air
C.The way of the vessel
D.securing of fuel to the cylinders
最新試題
Under MARPOL Code the ship to which it applies has to carry （）
The condensers located in various stages of a flash evaporator are cooled by（）
Which of the following items don’t belong to dock repair works?（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Cold weather starting of a diesel engine may be made easier by（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
If separating effect is not good, which measure should be taken （）