A.overload
B.the odds of the load
C.the default of parts
D.overload and the odds of the load
您可能感興趣的試卷
你可能感興趣的試題
A.testing for the mechanical load and the thermal load
B.inspecting thermal and mechanical condition of the engine
C.inspecting each system and exhaust temperature
D.testing for compress pressure and explosion pressure
A.the highest
B.above 3/4
C.1/2-3/4
D.the lowest
A.achromatism or thin gray
B.thin white
C.sky-blue
D.black
A.notify the duty officer, reduce the engine speed, take some measures to remove failures
B.notify the duty officer and stop the engine immediately, find the cause and remove failures
C.notify the C/E
D.notify the captain
A.2
B.3
C.4
D.5
最新試題
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Cold weather starting of a diesel engine may be made easier by（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish